A switching point can likewise be permanently displayed or the display can be set to be dark. This is the largest measured value which has been recorded since the unit was switched on or was last re-set. For example, the maximum value can be permanently displayed. 2 s In the basic settings the display can be altered. Digital display After switching on the supply voltage, the unit briefly displays EdS followed by the current pressure. Direct proximity to connecting lines of user units or electrical or electronic units causing interference must be avoided as far as possible.Ĥ of Operating keys on the membrane keypad HYDAC EDS digit digital display SP1 PSI SP2 keys for setting switching points, switch-back points and additional functions 4. LIYCY 4 x 0.5 mm 2 ) The cable screening must be fitted by qualified personnel subject to the ambient conditions and with the aim of suppressing interference. Additional assembly notes which, from experience, reduce the effect of electromagnetic interference: Make line connections as short as possible. In the case of Minimess hosemounting, the housing must be earthed separately. When fitted into a hydraulic block it is sufficient if the block is earthed via the hydraulic system. The pressure switch housing must be earthed properly at the same time. The electrical connection should be carried out by a qualified electrician according to the relevant regulations of the country concerned (VDE 0100 in Germany).
Mounting clamps are available as an accessory (see point 12.2 "Accessories - for mechanical connection"). strong vibrations or knocks) the pressure connection must be mechanically decoupled via a Minimess hose. Mounting The EDS 300 can be mounted directly onto a hydraulic block via the pressure connection (7/16 SAE 4 female). Analogue output Menu for basic settings (adapting the EDS 300 to the particular application) Two different types of programming enable Three different output ls are available: EDS 300 with 1 switching output (1.2 A load capacity, no analogue output) EDS 300 with 2 switching outputs (1.2 A load capacity, no analogue output) EDS 300 with 1 switching output (1.2 A load capacity) and 1 analogue output ( ma) 2. Switching the switching outputs according to the pressure and the pre-set switching parameters.
SUCOS SPRESS CODE
Functions of the EDS Mounting Operating keys on the membrane keypad Digital display Output function Switching outputs Switching point setting (SP) Window function setting (WIN) Analogue output Setting the Switching Points and Hystereses Setting ranges of the switching points and/or hystereses Basic settings Altering the basic settings Summary of the basic settings Programming enable Altering the operating programming enable Altering the main programming enable Error messages Technical specifications Circuit diagram Model code Accessories For electrical connection For mechanical connection Dimensions.16ģ of Functions of the EDS 300 Depending on the l, the unit offers the following functions: Display of the actual pressure, maximum value or a switching point. 1 Electronic Pressure Switch EDS 300 User manualĢ of 16 Content 1.
0 kommentar(er)
